The Best Water Softener

When you start to notice that you have hard water in your home, your first instinct might be to start shopping around for the water softeners Chicago has available. While a new water softener will certainly solve your problem, it’s much cheaper to keep an eye out for some of these common problems and have them repaired first. A good water softener repair service will be able to handle this, but you should still be able to recognize these issues.

The Motor Isn’t Running

If your water softener doesn’t run at all, the culprit could be the motor. If this happens, check to make sure that the cables are all connected and that the system is switched on. If everything looks good yet the motor still isn’t running, contact a repair professional to take a closer look. The motor itself may need to be replaced.

There is a Blockage in the System

The salt and other minerals that cycle through your water softener can build up into deposits and create a blockage. This can happen in the filter screen, the brine line, or at the base of the brine tank.

The filter screen is responsible for blocking the sediment in dirty salt. Over time, this sediment can build up and within the filter and create a blockage. Fortunately, this is an easy fix. Simply follow the directions in your water softener’s user’s manual to clear the blockage from the screen.

The brine line is a plastic tube that transports the salt water from the brine tank into the water softener. It should be flushed periodically to clear out any salt deposits, which is also a simple task that should be outlined in the user’s manual.

A blockage that appears in the brine tank is called a salt bridge. It can form when you add too much salt to your water softener too quickly, and appears as a hard dome of salt at the base of the tank. This can be broken apart with a rubber mallet or broom handle. Throw out the broken salt bridge, and make sure to use less salt in the future.

Iron in the Resin Bed

The resin bed attracts and removes particles of magnesium and calcium from the water. It also removes iron from your water, which can reduce the bed’s effectiveness over time. You can avoid this by using softener salt that contains an iron remover or by running an iron remover through your softener system once a year to flush out the bed.

These are some of the more common water softener issues that you will encounter. As you can see, they are fairly easy to repair if you catch them in time. If these solutions do not work or if you have any additional problems, contact your local water softener repair service.